Civil Engineering PhD

The Doctor of Philosophy (PhD) is a research-based degree program involving a high level of advanced training in the chosen field. A dissertation consisting of original research in a specialty area within the field is required.

A minimum of 48 credit hours of coursework are required. No dissertation credits are required.

A student entering the program with a prior MS degree may petition to transfer in a maximum of 30 graduate-level credits as approved by the program director.

A minimum of three years of graduate study is required. Students typically complete their degree within five years.

We encourage you to become familiar with the research areas in the Department, to reach out to our faculty for support, and to become actively engaged in the Department community. One way we encourage our students to become involved is by attending the seminar series we hold throughout the academic year. This is an opportunity to learn about advances in the academic community and to network with faculty and students from across campus.


·        Academic Integrity

Syracuse University aspires to the highest standards of integrity and honesty in all endeavors. The Academic Integrity Policy is designed to make integrity and honesty central to the Syracuse University experience by:

Education is a central goal of the policy, including affording students an opportunity to discuss and learn from academic integrity violations.

Students must fully inform themselves of their responsibilities in the conduct of their academic work and should familiarize themselves with Syracuse University’s policy on Academic Integrity.

·        Advising

The candidate, with advice from the department chair and/or the program director, selects a dissertation advisor, whose consent must be obtained. The candidate and the advisor together, with consent from the department chair, select the members of the examination and dissertation committees. The candidate, in consultation with the advisor and dissertation committee, selects a program of coursework appropriate to the research and scholarly interests of the student.

·        Exit Requirements

·        Exceeding Time to Degree Requirements

Exceeding Time to ABD Status (7 Years)

If the student has exceeded the seven-year limit for achieving ABD status, the student must register for GRD 991, which requires a minimum of one credit hour per semester, each fall and spring semester until ABD status is achieved. Students will be charged the tuition rate of one credit each semester for GRD 991. This cost will not be covered by the college or department. If the student fails to register for GRD 991, for a given term, the student will be withdrawn from the program.

Exceeding Time to Graduate Status (5 Years after ABD)

If the student has exceeded the degree completion limit of five years after achieving ABD status, the student must register for GRD 991, which requires a minimum of one credit hour per semester, each fall and spring semester until the completion of the doctoral degree.  Students will be charged the tuition rate of one credit each semester for GRD 991. This cost will not be covered by the college or department. If the student fails to register for GRD 991, for a given term, the student will be withdrawn from the program.


PhD Milestones


·        Qualifying Examination

The examination is composed of two parts: a written exam followed by an oral examination covering materials from at least three graduate level classes that the student has taken at Syracuse University, as well as relevant materials from undergraduate coursework. The purpose of this examination is to assess the student's background knowledge in his/her primary subject area(s) and his/her preparedness for Ph.D. level research. The result of this examination is a decision by the exam committee as to whether or not the student should continue in the Ph.D. program.

Timing

Students are expected to complete their Qualifying Exam after their first year of study.

Exam Committee

The exam committee shall consist of at least three faculty members. The majority of the committee membership shall be faculty members from the Department of Civil and Environmental Engineering at Syracuse University.

Scheduling

The student must work with their advisor to select the members of their exam committee, and to determine the date and time of the written and oral parts of the examination. The length of time spent on the written portion of the exam will be determined by the advisor in coordination with the committee.

Students must notify the department’s administrative assistant at least two weeks prior to the oral examination date with the Date, Time and Location of the oral exam and the selected Committee Members.

Qualifying oral examinations can be held in the CEE Conference Room (151A Link Hall) or in the Link-Plus Conference Room (462K Link Hall) if available, or other space upon request.

At least 2.5 hours should be scheduled for the oral exam to allow sufficient time for questions.

Exam Process

If the student does not pass this examination, they can request to retake the examination one more time in the following semester. In the event that the student fails the examination for the second time, their Ph.D. program of study will be terminated.

·        Candidacy Examination

Timing

Students are expected to present their research proposal to a faculty examination committee after completion of the student’s required Ph.D. coursework, but no later than the fifth semester after admission into the Ph.D. program.

Organization of the Proposal

Prior to this examination, the student shall prepare a detailed research proposal that includes but is not limited to a review of relevant literature leading to a statement of objectives (including major questions or hypotheses to be addressed in the dissertation), a description of methods and approaches to be used, and a brief description of the significance of the proposed work. The proposal will often include preliminary results from the student’s work to date.

Exam Committee

The examination committee will consist of five members: the dissertation advisor and at least four other faculty members.

The majority of the committee membership shall be faculty members from the Department of Civil and Environmental Engineering at Syracuse University.

A copy of the research proposal must be delivered to all members of the exam committee at least two full weeks prior to the oral defense date. Any committee member who receives their copy fewer than 14 calendar days prior to the defense may ask for a postponement of the defense. The student should not distribute the final draft of the research proposal until the advisor is satisfied with it.

Scheduling

The student must work with their advisor to select the members of their exam committee, and to identify which committee member will serve as exam chair, and to determine the date and time of the presentation.

A copy of the research proposal must be delivered to all members of the exam committee at least two full weeks prior to the oral defense date.

Students must contact the department’s administrative assistant at least two weeks prior to the presentation date with the Date, Time and Location of the Exam and the selected Committee Members.

Candidacy examinations can be held in the CEE Conference Room (151A Link Hall) or in the Link-Plus Conference Room (462K Link Hall) if available, or other space upon request.

At least 2 hours should be scheduled to allow sufficient time for questions.

Exam Process

The oral examination is initiated by a 30-40 minute summary of the dissertation research proposal and progress to date by the student.

Following the presentation, the dissertation committee members ask the student questions concerning the research proposal.

Following the examination, the dissertation committee confers to determine if the student is a suitable Ph.D. candidate based on his/her performance on the candidacy examination, as well as to determine if the student should be required to take additional coursework beyond the minimum required for the degree.

If the student successfully completes the candidacy examination by receiving an affirmative vote from the majority of the committee, the advisor notifies the student and the graduate school and the student is considered a Ph.D. candidate.

If the student does not successfully complete the candidacy examination, the committee determines whether the student will be permitted to retake the examination after a minimum period of six months or whether the student’s Ph.D. program should be terminated.

·        Dissertation

The Oral Dissertation Defense and submission of the dissertation document to the Syracuse University Graduate School are the final requirements of the PhD program.

Defense paperwork must comply with Graduate School’s guidelines, including formatting.

Preparation

It is recommended that the student meet with their defense committee to review dissertation progress at least three to six months in advance of the defense. The student should not distribute the final draft of the dissertation until the advisor is satisfied with it. Readers should be presented with a polished draft that has been proofread, paginated, and contains professional quality tables and figures with captions.

Deadlines

The official Request for Examination form must be signed and submitted to the Graduate School at least three full weeks prior to the oral defense date.

A copy of the dissertation document must be delivered to all members of the defense committee at least two full weeks prior to the oral defense date. Any committee member who receives their copy fewer than 14 calendar days prior to the defense may ask for a postponement of the defense.

Defense Committee

The dissertation defense committee will consist of six members, including

The Chair of the Oral Examination Committee must be a Syracuse University tenured or tenure-track faculty member from outside the department and program.

The student may substitute one committee member based on subject-matter expertise who does not satisfy the second bullet above and may be internal or external to Syracuse University. Additional external committee members may be allowed by petition.

Defense Process

The dissertation defense is usually initiated with a 30-40 minute summary of the research. This is followed by open questioning from the audience. When this is completed, the candidate is questioned by the dissertation committee members.

For the candidate to pass the dissertation defense, a majority vote on the quality and originality of the research, the quality of the dissertation, and the performance of the candidate at the examination is required.


Electives

Graduate students at Syracuse University are able to take courses at both SUNY ESF and SUNY Upstate Medical University.

Students may register for SUNY Upstate Medical University coursework using the Inter-Institutional Graduate Course Registration Form, which is available from the department’s administrative assistant. All coursework taken at SUNY Upstate Medical University must be approved by petition.

Students may register for SUNY ESF coursework normally using MySlice.

Please contact the department if you are interested in an elective that is not included on one of the approved lists below.

Additional coursework at Syracuse University or SUNY ESF may be approved by petition. CEE Master’s Degree Programs require at least 15 Credits of Coursework be CEE Prefixed.

·        Approved by Prefix and Level

Unless otherwise noted, all courses offered by either Syracuse University or SUNY ESF that are numbered 600:996 with one of the following prefixes are approved as electives for all MS & PhD programs of study.

Prefix

Department

APM

Applied Mathematics

ARC

Architecture

BCM

Biochemistry

BEN

Bioengineering

BIO

Biology

BPE

Bioprocess Engineering

BTC

Biotechnology

CEN

Chemical Engineering

CHE

Chemistry

CME

Construction Management Engineering

CIS

Computer and Information Science

CPS

Computational Science

CSE

Computer Engineering

EAR

Earth Sciences

ECS

Engineering and Computer Science

EGR

Engineering

FCH

Chemistry

IST

Information Studies

MAE

Mechanical and Aerospace Engineering

MAT

Mathematics

MEE

Mechanical Engineering

MFE

Manufacturing Engineering

MTS

Materials Science

PHY

Physics

SCM

Supply Chain Management

·        Approved by Course, Syracuse University

Additionally, the following specific courses offered by Syracuse University are approved as electives for all graduate-level programs of study.

Course

Description

ARC 555

Introduction to Building Information Modeling*

ARC 558

Advanced Building Information Modeling and 3D Design

COM 600

Multimedia Reporting: Climate Change

EAR 600

Water Energy Field Course

EAR 601

Hydrogeology

EAR 665

Groundwater Modeling

ECS 526

Statistics for Engineers

ECS 651

Strategic Management & The Natural Environment

ECS 759

Sustainability Driven Enterprise

GEO 683

Geographic Information Systems

IST 687

Introduction to Data Science

IST 719

Information Visualization

MAE 548

Engineering Economics and Technology Valuation

MAE 573

Application of Finite Element Analysis

MAE 587

Design of Solar Energy System

MAE 626

Vibration of Mechanical Systems

MAE 658

Built in Environmental Modeling

MBC 616

Operations Management

MBC 617

Supply Chain Management

PAI 734

Public Budgeting

PAI 895

Managerial Leadership

SCM 656

Project Management

SCM 701

Supply Chain and Logistics Management

SCM 702

Principles of Management Science


*Note that CEE 520 - Building Information Modeling and ARC 555 - Introduction to Building Information Modeling can only be counted once towards a program of study. If a student has taken either CEE 520 or ARC 555 and used it towards any program of study, they cannot take the other course for program credit.


·        Approved by Course, SUNY ESF

Additionally, the following specific courses offered by SUNY ESF are approved as electives for all graduate-level programs of study.

Course

Description

APM 595

Probability and Statistics for Engineers

APM 620

Experimental Design and ANOVA

CME 531

Construction Safety

CME 535

Cost Engineering

CME 543

Construction Estimating

ERE 527

Stormwater Management

ERE 551

GIS for Engineers

ERE 645

Hydrologic Modeling

ERE 693

GIS-Based Modeling

ENS 607

Wetland Practicum

EST 695

Environmental Journalism

EST 770

Ecological Economics & Policy